Advertise
Computers

Asus beta BIOS adds memory training counter to debug display

Firmware based on AMD's AGESA 1.3.0.1F shows progress on the motherboard debug screen, but not on the monitor.

Asus has released beta BIOS updates built on AMD's AGESA 1.3.0.1F firmware, adding a memory training progress counter to the motherboard's debug screen, according to pcgamer.com. The counter runs from 00 up to 09 and then continues through 0a, 0b, 0c and so on while memory training is underway.

The display appears only on the board's debug screen, not on the monitor. In a test on an Asus Crosshair X870E Hero with 64 GB of DDR5-6000 and a Ryzen 9 9950X, the counter reached 11 before training finished and the board rebooted.

The test used the 1.3.0.1f Patch A BIOS. The current official BIOS on that system is AGESA 1.3.0.1d.

Why the counter matters

Previously, memory training produced no monitor output and showed only a static debug code, such as "15", so a PC could appear to have hung. On AMD motherboards the process is called memory training; on Intel boards it is called memory refurbishment and runs in the background.

Memory training can take many minutes and reruns after memory changes or periodically to find stable timings and voltages.

Quick answers

What does the new Asus BIOS add?

It adds a memory training progress counter to the motherboard debug screen, counting from 00 to 09 and then through 0a, 0b, 0c and so on.

Does the counter show on the monitor?

No. It appears on the motherboard debug screen only.

Which firmware is the update based on?

AMD's AGESA 1.3.0.1F firmware, released by Asus as a beta BIOS.

Source