Advertise
GadgetsPhones

Bluetooth adopts HDT spec, lifting LE data rate to 7.5Mbps

The new High Data Throughput specification requires all-new radio hardware, so existing phones and accessories won't support it.

Bluetooth has officially adopted its High Data Throughput (HDT) specification, raising the maximum physical-layer data rate of Bluetooth Low Energy from 2Mbps to 7.5Mbps, according to Android Authority.

The jump in bandwidth comes with a hardware cost: HDT requires all-new radio hardware, meaning users will need new smartphones and accessories to take advantage of it. Devices already on the market cannot be upgraded to the faster mode through software alone.

Qualcomm's FastConnect 8800 wireless setup claims Bluetooth HDT capabilities. The company notes that its original HDT implementation was based on a working draft of the specification, so actual product support still needs confirmation now that the final version has been adopted.

The Bluetooth SIG lists extended reality, spatial computing and AI-enabled devices among the potential applications for the extra bandwidth.

What the extra speed means for audio

Conventional Bluetooth LE has a 2Mbps maximum physical-layer data rate, while Bluetooth Enhanced Data Rate tops out at 3Mbps. Typical Bluetooth audio streams run from around 200 kbps to just over 1 Mbps depending on the codec.

Among current codecs, LDAC and LHDC offer modes around 900 kbps to 1 Mbps, and aptX Lossless can dynamically reach up to 1 Mbps, delivering bit-exact CD-quality audio when radio conditions permit.

Quick answers

What is Bluetooth HDT?

High Data Throughput is a newly adopted Bluetooth specification that raises Bluetooth Low Energy's maximum physical-layer data rate from 2Mbps to 7.5Mbps.

Will my current phone support Bluetooth HDT?

No. HDT requires all-new radio hardware, so new smartphones and accessories are needed to use it.

Does Qualcomm's FastConnect 8800 support Bluetooth HDT?

Qualcomm claims HDT capabilities for the FastConnect 8800, but says its original implementation was based on a working draft, so product support still needs confirmation.

Source